Picture this. You spray a coat on an old patio chair and the can promises it will dry in 30 minutes. An hour later you touch it and your fingertip comes away painted. It’s a common problem for South Florida residents and it has nothing to do with their technique.
The can is recommending drying times based on mild and dry days. Fort Lauderdale rarely experiences those. Spray paint takes longer to dry here than the can specifies and it can be significantly longer. This guide aims to inform you of how long to wait and why, so that you can time your project around our local weather.
Dry to the Touch, Dry to Handle, and Fully Cured
Spray paint dries in stages and doesn’t finish at the first stage. The paint feels dry on the surface shortly after spraying, but it has a softer layer beneath. This is “dry to the touch” and that time is often printed on the can. “Dry to handle” is the next stage when you can lift the item without leaving an indentation. The last stage is fully cured when the paint reaches its hardened state.
Many people consider “dry to the touch” as the end. They set a plant on the table or pile chairs on a couch and the paint gets marked. It’s the fully cured state that gives the paint its full strength so it’s worth the wait.
| Stage | Dry, Mild Weather | Humid South Florida |
|---|---|---|
| Dry to the Touch | 15 to 30 minutes | 30 to 60 minutes |
| Safe for Second Coat | 30 to 60 minutes | 1 to 2 hours |
| Dry to Handle | 1 to 2 hours | 3 to 5 hours |
| Fully Cured | 1 to 3 days | 3 to 7 days |
These are the average ranges. The can you’re using may show slightly different guidelines.
Why Humidity Affects Drying Times
While the paint is curing the liquid portion, called the solvent, evaporates and leaves the surface. Dry air readily absorbs the evaporated solvent and the paint dries. Moist air has already absorbed its share of solvent, so the evaporation takes longer to occur.
Moisture can affect the curing process by causing imperfections. Trapped moisture can cause cloudy, milky spots on dried paint called blushing. The paint may also become rough-textured with little bumps. Neither is usually due to a painter’s error. It’s the result of an inappropriate environment.
What Our Weather Does To Spray Paint
Humidity levels in and around Fort Lauderdale often stay in the 70s. They peak in the rainy season of approximately late May until October. Skies can clear up for an afternoon, but it’s common to catch an afternoon storm rolling in by three o’clock. If you plan to paint in Fort Lauderdale, you’ll need to time your spray paint around the weather just as much as the can’s instructions.
A similar consideration is made in Hollywood, Dania Beach and throughout Broward County. Salt in the air causes bare metal to rust faster, which is why railings and gates need a better coat. For spray painting in Broward County, December through March is often the best window. The air is cooler and drier, and paint appears to dry faster.
Drying Times By Type of Spray Paint
Various types of spray paint cure at different rates. The following drying ranges are in normal humidity.
| Paint Type | Dry to Touch | Fully Cured | Common For |
|---|---|---|---|
| Acrylic | 15 to 20 minutes | About 24 hours | Crafts, wood, and indoor pieces |
| Lacquer | 10 to 15 minutes | 1 to 2 days | Furniture, smooth finishes |
| Oil-based enamel | 30 to 60 minutes | Up to 7 days | Metal, outdoor items |
| Epoxy | 30 to 60 minutes | Up to 7 days | Appliances, hard-wearing surfaces |
| Rust-preventive | 20 to 30 minutes | 1 to 3 days | Railings, gates, and tools |
If you’re choosing between spray paints for the outdoor furniture in Florida, oil-based and rust-preventive varieties seem to hold up better against the elements. They do require additional cure time, though. Some stores also offer paint matching services for spray paint, so you aren’t limited to the colors on the shelf.
What Affects Drying Times
Humidity gets the majority of the blame, but it’s not the only consideration.
- Temperature. Getting too cold slows the process. Getting too hot can cause the surface to begin to skin over while the lower layers remain wet. Mid-70s to mid-80s is a good range to aim for.
- Coat thickness. A heavy coat can double the curing time. This is the most common error.
- The surface. Wood absorbs some of the paint. Metal and plastic do not absorb it as readily and take longer to cure.
- Air flow. Still air allows the solvent to remain near the surface. A gentle breeze removes it.
- Direct sun. Hot sun can accelerate the curing, but it can also cause bubbles.
- Primer. Applying a good primer helps the adhesion and evens out the time it takes to cure. Many primers are designed specifically for bare metal or slick surfaces. Brands like Zinsser make good choices.
A simple test is to check the paint in a hidden area, such as the bottom of a seat. Don’t press on the front. You’ll leave a mark.
Best Time of Day To Spray
Mid-morning is typically your best bet, after the morning dew has evaporated. Around 9 or 10 in the morning, the air is a little drier and the sun hasn’t peaked yet. It’ll give your paint a number of hours to cure before the afternoon storms move in.
Avoid late afternoon, as the humidity rises and dew can cling to a damp surface. If you’re forced to work in the late afternoon, it’s best to work in a garage with a door open or a fan to help the process along. This advice works for people near Hollywood, Dania Beach or Fort Lauderdale. Weather doesn’t recognize city lines.
Florida Humidity Spray Paint Tips That Help
You can’t change the weather, but there are things you can do to help.
- Paint inside, with the AC on. The dehydrating air will help the process.
- A dehumidifier. Even a small dehumidifier in a garage makes a big difference.
- Fans. Don’t blow directly on the work, but circulate air.
- Thin coats. Paint in two to three light coats as opposed to one heavy coat.
- Between coats. Follow directions on the can, then add another 15 or 20 minutes.
- Warm the can slightly. Set it in a bowl of warm tap water for a few minutes. Never use an open flame.
- Check the forecast. Don’t paint if it’s supposed to rain or be excessively humid.
Prep is key and a handful of painting supplies, like sandpaper, tape and drop cloths, can account for most of it.
Mistakes That Lead to Sticky or Bumpy Paint
Many mistakes fall into a short list.
- Spraying too close to the surface, which results in drips
- Putting the second coat on too soon
- Painting right after rain
- Failing to put a primer on bare metal
- Stacking items before the paint is fully cured
- Following the directions on the can exclusively without accounting for humidity
If you’ve unintentionally made one of these errors, it can often be remedied. Let your paint cure completely, lightly sand the spot you’re concerned with, and apply a thin top coat. Asking a local paint store in Dania Beach before buying may also save you the drive back.
How To Tell It's Dry
Touch a hidden area (back edge, bottom-side) and if it feels smooth and cool and not sticky, it’s dry to the touch. Give this a few more hours before putting it to use. Avoid pressing a heavy imprint in the paint with your thumb.
For a fully cured piece, think in days. It takes about three before anybody should sit in a patio chair and a metal railing should wait closer to a week before regular use. If you’re unsure, give it just one more day.
Give Your Paint The Time It Needs, South Florida
Spray paint is an easy endeavor unless you’re a victim of our weather. Always allow more time than the can recommends, spray on drier days and thin out your coats. These three habits will likely save you from most of the problems that can arise.
Whether you’re shopping for spray paint in Hollywood, FL or on a project in Fort Lauderdale, let your paint have that additional time. A smooth result is well worth the extra patience.